DAELIM Q2 Owner's Manual page 56

INSPECTION METHOD, TIPS
•Checking of crack or damage
Crack
Alien
material
Damage
Nail
•Checking of abnormal abrasion
abnormal
abrasion
•Checking the home depth of tire
Wear indicator position mark
Wear indicator(shows the abrasion limit)
The usage of excessively worn tire and tire having
●
improper air pressure may cause accident like turn-
over, result in death or serious damage.
Observe the air pressure shown on the user's manual
●
and replace the excessively worn tire with the new one.
54
Check whether there is prominent crack
or damage around the tire.
Also, check whether nail, stone or alien
material stuck to the surface if tire.
Check whether there is abnormal
abrasion on the surface of tire.
Check by the wear indicator(slip line)
whether the home depth of tire is enough
or not.
WARNING
INSPECTION METHOD, TIPS
ENGINE
•Inspection of engine oil capacity(※)
HI
LOW
•Inspection of cooling water capacity
Reserve tank
SEAT
•Checking the engine starting and abnormal sound(noise)
At flat ground, do idling the engine for a
few minutes, erect the vehicle and stop
it, then check the engine oil capacity
whether it is within the specified range
of level gauge(between the upper and
lower line).
Erect the main stand, check whether the
cooling water in reserve tank is within
the specified range(between upper and
lower line).
Check whether the engine start
speedily and then rolls smoothly.
Also, at engine starting, check
whether abnormal noise is or not at
idling status.