Pro-Form 425 CSE User Manual page 9

STEP 8
Connect the Upper Computer Cable and two
hand pulse cable with the cable on the back of
computer (1).Sit the Computer (1) into its bracket
and secure in place using the four screws. Attach
the Tablet Holder (97) to the computer (1) with
four screws (2), start all the screws, and then
tighten them.
STEP 9
Secure plastic cover (12) onto the handlebar
post with a screw(11).
Note:Before using the machine, make sure all
the screws are fasten tightly
Now your machine is ready for use.
2
9
97
1
96
11
12