Siemens SINAMICS G120 Manual page 73

6 Configuration and Settings
6.1 Configuring the SIMATIC S7-300/400F controller
No. Action
15. Open the Properties of the F-DI
module and go to the
"Parameter" tab
Set the DIP switches on the
rear of the F-DI according to
the details in "F parameter >
DIL switch position (9...0)"
(see chap. 3.2)
Activate "Sensor supply via
module" in the module
parameters in the tree.
Quit the dialog box with
"OK".
16. Click "Save and compile"
17. Download the configuration to
the S7-CPU.
Thus, the hardware configuration
is completed.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remarks
73