Siemens SINAMICS G120 Manual page 22

3 Setup and Commissioning
3.7 Downloading the SINAMICS configuration
No. Action
2. Confirm that you want to change
the assignment.
3.
In the Assignment tab,
select "TCP/IP --> network
card"; instead of network
card, the name of the
network card you want to
use must be listed.
Click on "Assign".
4. If necessary, acknowledge that
the network card cannot be
configured by STEP7.
5.
Make sure that the selected
component is shown in
"Assigned" and single-click
on it.
Make sure that "Active" is
checked.
Click on "OK".
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remark
22