4 Operation of the Application
4.3 Monitoring and parameter access via operator panel
Fault buffer
The screen displays, the fault codes of eight current and eight acknowledged faults
which are saved in the SINAMICS G.
Note
The values are read by SINAMICS G via the "Read parameters" function in
Figure 4-8
When the "Fault buffer" screen comes up, the data stored in SIMATIC
S7-300/400F is displayed and may therefore be out of date.
Figure 4-9
Tap or click on the message number to display the respective message text.
Figure 4-10
The message text is displayed as long as the message number is pressed.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457,
V2.2,
and saved in the SIMATIC S7-300/400F.
11/2014
40