Siemens SINAMICS G120 Manual page 70

6 Configuration and Settings
6.1 Configuring the SIMATIC S7-300/400F controller
No. Action
7.
Search your SINAMICS G in the catalog:
The path in the catalog is:
> PROFIBUS > SINAMICS > SINAMICS G110M
Then select your CU (Control Unit). Depending on which SINAMICS G120 you have
The picture shows the example of a selected SINAMICS G120 with CU 240E-2 DP-F.
8. Drag the selected CU onto
the PROFIBUS line and
release the mouse button.
Select address 5 .
Click the OK button.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2,
or SINAMICS G120
or SINAMICS G120C
or SINAMICS G120D
11/2014
Remarks
70