Siemens SINAMICS G120 Manual page 69

6 Configuration and Settings
6.1 Configuring the SIMATIC S7-300/400F controller
No. Action
5. Open the properties of the
S7-CPU
Select level 3 in the
"Protection" tab and assign
a password (e.g. "siemens")
Checkmark "CPU contains
safety program".
6. Select the Cyclic Interrupts tab
Make sure that the time for
OB35 is set to 100ms.
Close the Properties of the
S7-CPU with OK
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remarks
69