Offline Programming - Samsung OFFICESERV 7100 Service Manual

CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.

4.3 Offline Programming

The offline program is the program used for checking if the system operates normally.
The offline program for checking the system should be saved in the smart media by all means.
This program is used for checking the system easily in the field.
4.3.1 Preparation
Prepare the following items before using the offline program for checking the system.
PC which supports the serial communication
Communication program: QMODEM, etc.
Multimedia card where the related programs(<startup.sys> <aftxxx.pgm>
<MP10/11mxxx.pgm>) are saved
4.3.2 Environment Configuration
1) Connect the cable for communication between the PC and the OfficeServ 7100 system.
Connect to the SIO port of the MP10/11 boards.
2) Perform the communication program in the PC.
3) Set the communication speed as 19,200 bps.
4) Prepare the multimedia card where the related programs are saved and save it in the
front panel of the MP10/11.
4-20
© SAMSUNG Electronics Co., Ltd.