Yamaha 4SH-28199-67 Owner's Manual page 266

1. Clamp
1. Bride
1. Mordaza
1. Drain bolt (engine oil)
3. Compression spring
1. Boulon de vidange (huile de moteur)
3. Ressort de compression
1. Perno de vaciado (aceite del motor) 2. Junta tórica
3. Muelle de compresión
2. O-ring
4. Oil strainer
2. Joint torique
4. Crépine à huile
4. Colador de aceite
8-15
Engine oil replacement and oil filter cleaning
1. Place the machine on a level place.
2. Warm up the engine for several minutes
and stop it.
3. Place a container under the engine.
4. Remove the clamp.
5. Remove the oil filler cap and drain bolt to
drain the oil.
CAUTION:
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall out.
Take care not to lose these parts.