Ricoh D014 Service Manual page 1049

Rev. 04/2008
S35 Rear Fence HP Sensor
S36 Rear Fence Return Sensor
S37 Left Tray Paper Sensor
Internal Temperature
⇒
S38 Sensor
S39 Waste Toner Lock Sensor
S40 Duplex Transport Sensor 1
S41 Duplex Inverter Sensor
S42 Duplex Entrance Sensor
S43 Duplex Transport Sensor 3
SM
CÓPIA NÃO CONTROLADA
Detects the actuator on the rear fence in the
tandem tray and switches off the rear fence
motor.
Detects the actuator on the rear fence in the
tandem tray and reverses the rear fence motor.
Detects the presence of paper in the left tray of
the tandem tray.
Located near the Y_PCU, this thermistor
monitors the internal temperature of the
machine.
Signals an alert if the waste toner collection coil
locks and stops rotating.
The feeler of this sensor detects the leading
edge and trailing edge of each sheet as it
passes from the jogger unit above and into the
horizontal feed path of the duplex unit below.
Signals a jam if the paper does not arrive at or
reach the sensor location at the prescribed time.
Detects the leading edge of the paper at the
inverter exit roller and signals to switch off the
reverse trigger roller solenoid to signal a jam if
the paper does not arrive at the prescribed time.
Detects paper jams at the entrance of the duplex
unit.
Detects the leading edge and trailing edge of
each sheet as it passes from the jogger unit
above through the horizontal feed path of the
duplex unit below. Signals a jam if the paper
does not arrive at or reach the sensor location at
the prescribed time.
7-47
CÓPIA NÃO CONTROLADA
Specifications
D014/D015/D078/D079