Finisher Jam Detection - Ricoh D014 Service Manual

2.9 FINISHER JAM DETECTION

Display Mode
Proof
R1 to R3 Shift
Staple
R3 Proof
B804/B805/D373/D374
CÓPIA NÃO CONTROLADA
Jam
Finisher After main machine exit sensor goes OFF,
entrance finisher entrance sensor does not go ON even
sensor late after enough time to feed 450 mm.
Finisher After finisher entrance sensor goes ON, it does
entrance not go OFF after enough time to feed a sheet
sensor lag 1.5 times its length has elapsed.
After finisher entrance sensor goes ON, proof
Proof exit
exit sensor does not go ON even after enough
sensor late
time to feed 450 mm.
After finisher entrance sensor goes OFF, proof
Proof exit
exit sensor does not go OFF even after enough
sensor lag
time to feed 450 mm.
72
CÓPIA NÃO CONTROLADA
Finisher Jam Detection
What It Means
SM