1. REPLACEMENT AND ADJUSTMENT
1.1 COMMON PROCEDURES
1.1.1 TRAYS
The tray weighs 27 kg (60 lb.) empty.
To prevent damage to the tray and personal injury, never attempt to lift the tray
alone or without attaching the carrying handles, especially if it is loaded with paper.
(The carrying handles are attached to the side of the tray.)
One person on each side of the tray should use the handles to carry or move the
tray.
Never remove the tray if the LCT is not docked to the copier. Removing the tray
while the LCT is standing alone can unbalance the LCT and cause it to fall over.
1.
Pull the tray [A] out of the LCT until it stops.
2.
Remove the screws from the right rail [B] ( x3)
3.
Remove the screws from the left rail [C] (
You do not need to remove screw for the stopper pin bracket at the back of the
left rail.
SM
CÓPIA NÃO CONTROLADA
x3)
1
CÓPIA NÃO CONTROLADA
Common Procedures
D350