Ricoh D014 Service Manual page 645

3302 Tnr Supply
Sets the toner supply rate for fixed toner supply mode. The rate is set by
adjusting the on time of the toner supply clutch. This setting is used only if
SP3301 is set to "0".
1 Supply Rate:K
2 Supply Rate:M
3 Supply Rate:C
4 Supply Rate:Y
3303 Tnr Supply Rate
Displays for confirmation the toner supply rate of toner supply control using the
PID method. The toner supply rate is calculated as:
Toner Supply Rate = Toner Supply Time/Time Allowed for Toner Supply x 100
where:
Time is measured in msec.
"Time Allowed for Toner Supply (ms)" = Length of the paper (mm) + Width
of the gap between sheets (mm)/Drum speed (mm/s) x 1000.
Note: The toner supply control method is selected with SP3301.
1 Last Val:K
2 Last Val:M
3 Last Val:C
4 Last Val:Y
SM
CÓPIA NÃO CONTROLADA
[0 to 100/ 1%]
[0 to 100/1%]
5-103
CÓPIA NÃO CONTROLADA
Group 3000
D014/D015/D078/D079