Ricoh D014 Service Manual page 642

Group 3000
6 M Page Cnt
7 C Page Cnt
8 Y Page Cnt
3111 ID Sn:Voffset DFU
Displays the output voltage of the directly reflected light when the LED of the ID
sensor is switched off.
1 Voffset_Reg
2 Voffset_Dif
3121
Adjusted Vsg DFU
This SP displays the 1) results of the most recent Vsg adjustment.
1 Vsg_Reg:Col
2 Vsg_Dif:Col
3131 Ifsg After Vsg
Displays as a PWM value (pulse width modulation) the level of the ID sensor
LED after Vsg has been adjusted. Normal Vsg readings of the ITB bare
surface reflectivity should be in the range 4.0 ±0.2V.
1 lfsg:Col
3 lfsg:K
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
[0 to 5/0.01 V]
[0 to 5/0.01 V]
[0 to 4096/1]
5-100
CÓPIA NÃO CONTROLADA
SM