Alignment Brush Roller - Ricoh D014 Service Manual

1.2.3 ALIGNMENT BRUSH ROLLER

[B]
[D]
[E]
1. Open the front door and pull out the staple unit.
2. Remove the rear cover.
3. Remove the main board bracket and all connectors ( x 8). ( 1.4.6)
4. Remove the screw [A] and tension spring [B] for the tension bracket [C], and
release the tension of the timing belt.
5. Remove the pulley [D] and bearing [E].
6. Remove the inner cover [F] (  x 1).
7. Open the guide [G], then remove the alignment brush roller assembly [H].
8. Remove the alignment brush roller [I] (  x2, Bearing x 1 front/back,  x1).
SM
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
[C]
[A]
B830R507.WMF
[H]
[I]
7
CÓPIA NÃO CONTROLADA
[G]
[F]
B830R907.WMF
B830