Siemens SIMATIC S7-400 Reference Manual page 319

Technical specifications of the SM 432; AO 8 x 13 bit
Dimensions W x H x D (mm)
Weight
Number of outputs
Cable length
● Shielded
Supply voltage of electronics L+
Rated load voltage L+
● Reverse polarity protection
Electrical isolation
● Between channels and backplane bus
● Between channels
● Between channels and load voltage L+
Permissible potential difference
● between the outputs (UCM)
● between S- and MANA (UCM)
● Between MANA and Mintern (UISO)
Insulation tested at
● Between bus and L+/M
● Between bus and analog section
● Between bus and chassis ground
● Between analog section and L+/M
● Between analog section and chassis ground
● Between L+/M and chassis ground
Current consumption
● From backplane bus (5 V)
● Supply and load voltage L+ (at rated load)
● Supply and load voltage L + (no load)
Module power loss
Resolution (including overrange)
Conversion time (per channel)
● in the ranges 1 to 5 V and 4 to 20 mA
● in all ranges
Basic execution time of the module (all channels enabled)
● in the ranges 1 to 5 V and 4 to 20 mA
● in all other ranges
Settling time
● for resistive load
S7-400 Automation System Module Data
Reference Manual, Ausgabe 11/2016, A5E00850736-08
5.26 Analog output module SM 432; AO 8 x 13 Bit (6ES7432-1HF00-0AB0)
Dimensions and weight
Module-specific data
Voltage, current and potential
Formation of analog values
25 x 290 x 210
ca. 650 g
8
Maximum 200 m
24 V DC
24 V DC
Yes
Yes
No
Yes
3 V DC
3 V DC
60 V DC/30 V AC (SELV)
2120 V DC
2120 V DC
500 V DC
500 V DC
2120 V DC
2120 V DC
Maximum 150 mA
Maximum 400 mA
Maximum 200 mA
typ. 9 W
13 bits
420 µs
300 µs
3.36 ms
2.4 ms
0.1 ms
Analog modules
319