Cpu Queue Control - ZyXEL Communications MGS3750-28F User Manual

The following table describes the fields in this screen.
Table 38 IGMP Filtering Profile Screen
LABEL
Profile Setup
Profile ID
Profile Description
Profile Limit
Add
Modify
Del
Clear
Index
Profile ID
Profile Description
Profile Limit
Referred Port
Profile ID
Input Format
Start Address
End Address
VLAN
Add
Clear
Profile ID
Index
Start Addr
End Addr
VLAN
Delete

6.16 CPU Queue Control

Use this screen to control the rate at which packets are passed to the CPU.
Chapter 6 Advanced Application Configurations
DESCRIPTION
Add IGMP filtering profile.
The profile ID can be between 1-128.
You can add descriptions to a profile in this field.
Profile rule can be either permit or deny.
Click Add to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power.
Click Modify to make changes to a profile ID.
Click Del to delete a profile ID and the rules applied to it.
Click Clear to delete the configurations of the fields.
This is the index number of a IGMP filtering profile entry. Click this number to edit the
entry.
The profile ID can be between 1-128.
This field displays the profile description you've given to the profile ID.
You can choose to permit or deny the profile.
This field displays the port with the referred rules.
The profile ID can be between 1-128.
Filter address can be set as IP or MAC address.
Type the starting multicast IP address for a range of multicast IP addresses that you
want to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that you want to
belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address
and End Address fields.
Input a VLAN group number.
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power.
Click Clear to delete the configurations of the fields.
Thie field displays the profile ID.
Thie field displays the index number.
This field displays the starting multicast IP address that you want to belong to the
IGMP filter profile.
This field displays the ending multicast IP address that you want to belong to the IGMP
filter profile.
This field displays the VLAN ID with the IGMP filtering profile.
Click Del to delete a profile ID.
MGS3750-28F User's Guide
57