Broadcast Storm Control - ZyXEL Communications MGS3750-28F User Manual

Figure 30 Bandwidth Control Screen
The following table describes the fields in this screen.
Table 23 Bandwidth Control Screen
LABEL
Port
Ingress Rate
Egress Rate

6.8 Broadcast Storm Control

This section introduces and shows you how to configure the broadcast storm control feature.
Broadcast storm control limits the number of broadcast, multicast and Unicast packets the Switch
receives per second on the ports. When the maximum number of allowable broadcast, multicast
and/or Unicast packets is reached per second, the subsequent packets are discarded. Enable this
feature to reduce broadcast, multicast and/or Unicast packets in your network. You can specify
limits for each packet type on each port.
Figure 31 Broadcast Storm Control Screen
Chapter 6 Advanced Application Configurations
DESCRIPTION
This field displays the port number.
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the
incoming traffic flow on a port.
Note: Ingress rate bandwidth control applies to layer 2 traffic only.
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-
going traffic flow on a port.
MGS3750-28F User's Guide
39