Static Vlan - ZyXEL Communications MGS3750-28F User Manual

Table 9 VLAN Port Settings Screen
LABEL
Acceptable Frame
Port Mode
Port GVRP
Ingress Check

6.1.3 Static VLAN

Add, edit, or remove VLAN ports.
If a new VLAN is added with VID=10 that contains 1 Tagged port and 2 Untagged ports, the user
can click on the white area underneath the port number to edit its member ports. The Modify
function is identical to Add.
Figure 17 Static VLAN Screen
Chapter 6 Advanced Application Configurations
DESCRIPTION
Specify the type of frames allowed on a port. Choices are All, Tag Only and Untag
Only.
Select All from the drop-down list box to accept all untagged or tagged frames on this
port. This is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames will be
dropped.
Select Untag Only to accept only untagged frames on this port. All tagged frames will
be dropped.
Edit the port mode; there are three port modes:
Select Hybrid mode and port can be tagged or untagged within a VLAN; it can also
be a member of multiple VLANs.
Select Trunk mode and port must be tagged within a VLAN; it can also be a member
of multiple VLANs.
Select Access mode and port must be untagged within a VLAN; this port can only be
inside one VLAN.
Enable the port's GVRP (Dynamic VLAN learning function; port must be set to Trunk
mode).
If this check box is selected, the Switch discards incoming frames on a port for VLANs
that do not include this port in its member set.
Clear this check box to disable ingress filtering.
MGS3750-28F User's Guide
24