Static Mac Forwarding - ZyXEL Communications MGS3750-28F User Manual

The following table describes the labels in this screen.
Table 10 Static VLAN Screen
LABEL
Current static
VLAN
Port Number
VLAN Group ID
Name
Refresh
Add
Modify
Delete
Cancel
VID
Name
Delete

6.2 Static Mac Forwarding

Manually add dynamic, static, blackhole, and permanent MAC addresses.
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static
MAC addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch.
A blackhole port drops traffic without notifying the sources.
Chapter 6 Advanced Application Configurations
DESCRIPTION
Select the static VLAN group, and make configurations to the group.
This column displays the ports that are participating in a VLAN. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked as "–".
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Enter a descriptive name for the VLAN group for identification purposes. This name consists
of up to 64 printable characters. Spaces are allowed.
Click Refresh to update the screen.
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power.
Select a static VLAN group from Current static VLAN field, and make configurations to the
group.
Click Delete to remove the VLAN group ID.
Click Cancel to change the fields back to their last saved values.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
This field diesplays the name of the VID.
Select the check box to delete the VID.
MGS3750-28F User's Guide
25