Mirroring - ZyXEL Communications MGS3750-28F User Manual

The following table describes the fields in this screen.
Table 24 Broadcast Storm Control Screen
LABEL
Port
Broadcast(unit:64pp
s)
Multicast(unit:64pps) Specify how many multicast packets the port receives per second.
Unicast(unit:64pps)

6.9 Mirroring

Use this screen to select a monitor port and specify the traffic flow to be copied to the monitor port.
Figure 32 Mirroring Screen
The following table describes the fields in this screen.
Table 25 Mirroring Screen
LABEL
Active
Monitor Port
Port
*
Chapter 6 Advanced Application Configurations
DESCRIPTION
This field displays the port number.
Specify how many broadcast packets the port receives per second.
Limit the number of unknown unicast packets that the port can receive each second.
The unit is packets per second and its actual value must be a multiple of 64.
DESCRIPTION
Select this check box to activate port mirroring on the Switch. Clear this check box to
disable the feature.
The monitor port is the port you copy the traffic to in order to examine it in more
detail without interfering with the traffic flow on the original port(s). Enter the port
number of the monitor port.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
MGS3750-28F User's Guide
40