Setting Mode
4-2-3 Setting Value Menu (sUset)
s.bank
sU*.hh
sU*.h
sU*.l
sU*.ll
FUNCTION
SETTING
REFERENCE
MODELS
50
Bank No. of Set Value
HH Set Value
H Set Value
L Set Value
LL Set Value
• There are two basic methods for setting HH, H, L, and LL set values: by enter-
ing during RUN mode via the front-panel buttons, setting in Setting mode, or by
the teaching function.
Setting
Set value bank
HH set value
H set value
L set value
LL set value
Set the decimal point position in the prescaling menu.
Refer to 6-1 Teaching Function.
• The menu is only available for the K3NR with Comparative Output Board.
Setting range
1 to 4
–19,999 to 99999
,
Section 4-2
Default
1
99,999
99,999
–19999
–19999