Wirelesshd Transmitter Part Names - Epson EH-TW6700W User Manual

Useful Functions

WirelessHD Transmitter part names

Front
Name
a
button
t
b
button
c
button
d Main power switch
e AC adapter port
f HDMI Out port
g Optical Audio-Out port
h HDMI Input port
i 3D Glasses charging port
j Setup button
k On/Standby indicator
(blue)
Rear
Turns the transmitter on or off.
This performs the same function as the
Transmitter control on the lower section of the remote control.
Changes to the image from each input port.
This performs the same function as the
Transmitter control on the lower section of the remote control.
Switches the output image to the projector or the device connected to the
HDMI Out port.
This performs the same function as the
Transmitter control on the lower section of the remote control.
Turns the main power for the transmitter on or off.
Connects the AC adapter.
Connects to a monitor device, such as a television. You can switch the mon-
itor devices using the
button on the WirelessHD Transmitter.
Connects to an audio device equipped with an optical digital audio input
port.
Connects to the AV device you want to playback. You can switch the input
image using the Input button.
The HDMI4 port of the unit meets the MHL standards. You can play content
from MHL compatible smart devices or tablets connected with an MHL ca-
ble.
Connects a USB cable to charge the 3D Glasses.
This is the button on the back of the WirelessHD Transmitter. It is used for
setting the WirelessHD Transmitter.
Since this is already set when the transmitter is shipped, it should not nor-
mally be used.
This flashes while the WirelessHD Transmitter is starting up, and remains lit
while operating.
57
Function
button for the WirelessHD
button for the WirelessHD
button for the WirelessHD
button on the remote control or the