Epson EH-TW6700W User Manual page 92

Configuration Menu
Function
Search Bluetooth
Bluetooth
Device
Bluetooth Audio
Lock Setting Child Lock
Control Panel Lock
User Button Fine/Fast, 3D Display, 2D-to-3D Conversion,
Brightness Control, Info, Display the QR Code
Menu/Settings
-
On, Off
On, Off
Full Lock, Partial Lock, Off Full Lock: Disables all of the projec-
91
Explanation
Searches for available Bluetooth de-
vices and displays them as a list.
Enables or disables audio output from
Bluetooth audio devices.
Setup cannot be performed in the fol-
lowing cases.
•
When the source is LAN or USB
•
When Audio Out Device from the
HDMI Link menu is set to AV Sys‐
tem, WiHD Transmitter (Optical),
or WiHD Transmitter (HDMI)
This locks the button on the pro-
jector's control panel to prevent chil-
dren from turning on the projector by
accident. You can turn on the power
when locked by holding down the
button for approximately three
seconds. You can still turn off the de-
vice using the button, or perform
operations with the remote control as
usual.
If changed, this setting is enabled af-
ter you power off the projector and
the cool-down process is complete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Direct
Power On is set to On.
tor's buttons.
Partial Lock: Disables all of the pro-
jector's buttons except for the
button.
is displayed on the screen if but-
tons are pressed while the projector
is locked. To unlock, press and hold
the button on the control panel
for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.
Select a Configuration menu item to
assign to the button on the re-
mote control. By pressing the
button, the assigned menu item se-
lection/adjustment screen is dis-
played, allowing you to make one-
touch settings/adjustments.