Epson EH-TW6700W User Manual page 105

Troubleshooting
Problems relating to im-
ages
Sound problems
Problems when projection
starts
Problems with the remote
control
Problems with the control
panel
Problems with 3D
Problems with HDMI
Bluetooth device prob-
lems
Problems with WirelessHD Cannot project WirelessHD images.
Network problems
* Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.
Problem
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
Moving images being projected from a computer are not projected.
"Not supported" is displayed
"No Signal" is displayed
Keystone distortion of projected image
Images are fuzzy or out of focus.
Interference or distortion appears in the images.
The image is truncated (large) or small, or only a part of the image is
projected.
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
Images appear dark.
Projection stops automatically.
Slideshow does not start
No audio, or the audio is too low
The projector does not turn on.
The remote control does not respond.
Cannot make settings on the control panel.
Cannot project correctly in 3D.
HDMI Link does not function.
The device name is not displayed under device connections.
Cannot Connect Bluetooth Device
The audio and connection for the Bluetooth device disconnects
Interference, distortion, or interruption appear in WirelessHD.
Half of the image on the left or right stops projecting or the image is
doubled up.
Cannot access the network via wireless LAN.
The image contains static during network projection.
104
*
Page
p.105
p.105
p.105
p.106
p.106
p.106
p.106
p.107
p.107
p.107
p.108
p.108
p.108
p.109
p.109
p.109
p.110
p.110
p.111
p.111
p.111
p.112
p.112
p.113
p.113
p.113