Signal Menu - Epson EH-TW6700W User Manual

Configuration Menu
*2 Only when an HDMI1, HDMI2, or PC image signal is being input.
*3
Settings are saved for each type of input source or Color Mode.
*4
EH-TW6800 only.

Signal menu

The Signal menu cannot be set when a LAN image signal is being input.
Function
*1
3D Setup 3D Display
3D Format
2D-to-3D Conver-
sion
3D Depth
Diagonal Screen
Size
3D Brightness
Inverse 3D Glasses
3D Viewing Notice
*2 *1
Aspect Auto
Wide
*2 *3
Tracking Varies depending on the input signal.
～
*2 *3
Sync. 0 31
*2 *3
Position
*3
Auto Setup On, Off
Menu/Settings
Auto, 3D, 2D
Side by Side, Top
and Bottom
Off, Weak, Medium,
Strong
～
-10 10
～
60 300
Low, Medium, High Sets the brightness for the 3D image.
Yes, No
On, Off
, Normal, Full, Zoom, Anamorphic
*4 *4
, Horiz. Squeeze
To view 3D images, set this to Auto or 3D.
p.49
s
Sets the 3D format for the input signal.
Converts 2D images to 3D images.
Sets the depth for the 3D image.
Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
Turns the notice that appears when viewing 3D
content on or off.
Selects the aspect mode.
Adjusts computer images when vertical stripes
appear in the images.
Adjusts computer images when flickering, fuzzi-
ness, or interference appear in the images.
•
Adjusting the Brightness, Contrast, or Sharp‐
ness may cause flickering or fuzziness.
•
When adjusting Sync. after adjusting the Track‐
ing, you can create a more vivid image.
Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the Tracking, Position, and
Sync. are automatically configured.
88
Explanation
p.38
s