Epson EH-TW6700W User Manual page 88

Configuration Menu
Function
Image Preset Mode
Image En-
*2
hancement
Noise Reduction
MPEG Noise Reduction
Super-resolution
Detail Enhancement
Advanced Gamma
RGBCMY
Deinterlacing
EPSON Super White
Power Con- High, Medium, ECO
sumption
Auto Iris Off, Normal, High Speed
Reset Yes, No
*1
Only when an HDMI1 or HDMI2 image signal is being input.
Menu/Settings
Off, Preset 1 to Preset 5 Select the settings prepared in advance as
Fine Line Adjust, Soft
Focus Detail
*4
Strength , Range
2, 1, 0, -1, -2, Custom-
*3
ized , Reset
R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Off, Video, Film/Auto
*1
On, Off
87
Explanation
the settings for Noise Reduction, MPEG
Noise Reduction, Super-resolution, and
Detail Enhancement.
Adjusts the roughness of the image.
Smoothes out rough images in MPEG for-
mat.
Adjusts the amount of enhancement for
complicated images and backgrounds.
*4
Creates a more emphatic texture and ma-
terial feel of the image.
Performs gamma adjustments. You can
select a raw value or adjust the gamma
while viewing the image or graph.
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
p.43
s
(This can only be set when Image Pro‐
cessing is set to Fine or when receiving
480i, 576i, or 1080i signal input from the
HDMI1, or HDMI2 ports or from Wire-
lessHD.)
Converts the signal from interlaced (i) to
progressive (p) using a method appropri-
ate for the image signal.
•
Off: This is ideal for dynamic motion im-
ages.
•
Video: This is ideal for viewing general
video images.
•
Film/Auto: Performs the optimal conver-
sion for film, CG, or animation input sig-
nals.
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
You can set the lamp brightness to one of
three settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
p.45
s
p.41
s