Correcting Using The Keystone Button; Correcting With Quick Corner - Epson EH-TW6700W User Manual

Basic Operations
c
Before correcting keystone distortion, it is recommended that you rotate the lens shift dials to adjust
the lens position as shown below:
- Horizontal position of lens: Center
- Vertical position of lens: Top edge

Correcting using the Keystone button

You can use the
Press the buttons to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the
(or ) buttons to perform horizontal correction.
When the top or bottom is too wide
When the left or right is too wide
c
•
When you correct keystone distortion, the projected image may be reduced. Increase the projection
distance to fit the projected image to the screen size.
•
You can also set H/V-Keystone from the Configuration menu.
Keystone p.89
•
You can make effective corrections within a projection angle range of 30° in any direction.
•
You can adjust the volume by pressing the
are not displayed. (EH-TW6700W/EH-TW6700 only)

Correcting with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly
rectangular.
(or the ) buttons on the control panel to correct keystone distortion.
buttons to perform vertical correction, and press the
34
Settings - Keystone - H/V-
s
buttons when the V-Keystone/H-Keystone gauges
p.35
s