Attaching The Wireless Lan Unit; Removing The Terminal Cover - Epson EH-TW6700W User Manual

Preparing

Attaching the Wireless LAN unit

To use the wireless LAN function, attach an optional Wireless LAN unit (ELPAP10).
Connect the Wireless LAN unit to the USB port.
You can use one of the following methods to project over wireless LAN. For more details, see the download
page.
• Projecting four screens simultaneously
When using EasyMP Multi PC Projection, you can project up to four separate screens from up to 50 computers
connected to the network.
Download EasyMP Multi PC Projection from the following Web site.
http://www.epson.com
• Projecting images from a mobile terminal via a network
By installing "Epson iProjection" on a smartphone or tablet, you can wirelessly project data on your device. s
c
•
When not using the wireless LAN function with the Wireless LAN unit kept inserted, set Wireless LAN
Power to Off. This can prevent unauthorized access from outsiders.
•
When using Epson iProjection or EasyMP Multi PC Projection in Quick, we recommend making security
settings. p.98
s

Removing the Terminal Cover

The terminal cover is attached to the connector section on the rear of EH-TW6700W. Remove this cover when
using a cable to connect a device.
There are gaps at the bottom of the terminal cover that allows you to pull the cover forward and lift it from
the grooves at the top.
When reattaching, first insert the protruding sections into the grooves at the top.
s
26
p.95
p.81