Clearing The Scanned Images - Xerox 8830 User Manual

Scanning to the Network (SCAN mode)
(continued)

Clearing the scanned images

The operator may remove scanned images from the 8825/8830 DDS hard
disk by pressing the C/CA key. The CLEAR SCANNED IMAGE screen is
displayed.
CLEAR SCANNED IMAGE
DO NOT CLEAR IMAGE
Press the Next key to scroll through the choices. Then press the Enter key
to execute the selection. The choices are:
•
DO NOT CLEAR IMAGE. The image is not deleted.
•
CLEAR LAST IMAGE. The last image scanned by the currently active
account is deleted. Press the C/CA key again, followed by the Enter key,
to delete the next-to-last scanned image. This process can be repeated
until all desired images are removed from the hard disk.
Note: it is not possible to skip images. For example, it is not possible to
leave the last image scanned, but delete the next-to-last image scanned.
•
CLEAR ALL IMAGES. All images stored under the currently active
account are deleted.
Note: if Job Accounting is not enabled, the images are deleted from
subaccount 0.1.
Margin Transform
Sets Build
1 2
4 5
Finisher
7 8
Store/
Recall
. 0
Start
Printer
Stop
Interrupt
8825/8830 DDS User Guide/60
Sample
3
6
9
C/CA