Maintenance Chart - Takeuchi TCR50 Operator's Manual

MAINTENANCE

Maintenance Chart

Walk-Around Inspection
Inspecting by opening the engine hood and covers
Inspecting by walking around the machine
Inspecting while sitting in the operator's seat
Daily Inspection (Every 10 Hours)
Inspecting and replenishing the coolant
Inspecting and replenishing the engine oil
Inspecting the water separator and the fuel filters
Inspecting the fuel level
Inspecting the hydraulic oil level and replenishing
Lubricating the dump body and track rollers
After First 50 Hours (New Machines Only)
Replacing the pilot line filter
Replacing the hydraulic oil return filter
Inspecting and adjusting the fan belt
Replacing the engine oil and oil filter
Every 50 Hours
Inspecting the crawler tension
Inspecting the battery fluid level and replenishing
Draining the fuel tank
After First 250 Hours (New Machines Only)
Replacing the travel motor gear oil*
Every 250 Hours
Cleaning the air cleaner
Lubricating the swing bearing
Cleaning the radiator fins and oil cooler fins
Inspecting and adjusting the fan belt
*: If the percentage of the traveling time within the total operating time is high, replace the gear
oil earlier than the specified time.
Maintenance Items
96
See page
98
99
99
100
101
102
102
103
104
105
106
107
108
110
110
112
113
114
115
116
116