Before Starting Operation - Takeuchi TCR50 Operator's Manual

OPERATION

Before Starting Operation

Mounting and Dismounting
WARNING
� Do not jump on or off the machine.
Never attempt to mount or dismount a
moving machine.
� When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move.
� Always face the access system and
maintain a three point contact with
the recommended handrails and steps
while getting on and off the machine.
Keep steps and platform clean.
� Never use the safety lock lever or
control levers as hand holds.
Walk-Around Inspection
Perform the walk-around inspections once a
day before starting the engine the first time
that day.
Perform the inspections as described under
"Maintenance - Walk-Around Inspection"
(pages 98 and 99).
Daily Inspection
Perform the daily inspections once a day
before starting the engine the first time that
day.
S2D001
Perform the inspections as described under
"Maintenance - Daily Inspection" (pages 100
to 104).
64