If A Fuse Blows - Takeuchi TCR50 Operator's Manual

TROUBLESHOOTING

If a Fuse Blows

If a light does not turn on or the electric
system does not operate, a fuse may be
blown. Inspect the fuses.
Inspecting and Replacing the
Fuse
WARNING
If the fuse blows as soon as it is replaced,
there is a problem with the electric system.
Continued use may lead to fire. Consult a
Takeuchi sales or service outlet.
1. Turn the starter key to the OFF position
and stop the engine.
1
2. Open the fuse box cover (1).
3. Inspect for any blown fuses.
Blown
4. If a fuse is blown, replace it with a spare
fuse of the same capacity.
L3J002
Normal
E4J007
136
Fuse Layout and Circuits Protected
Capacity Protected circuit Capacity Protected circuit
5A Fuel feed pump
10A Control circuit
20A ECM
10A Controller
5A Option
10A Horn
Interior light,
5A
Radio backup
10A Starter circuit
20A Lights
10A Wiper motor
20A Air conditioner
10A Solenoid valve
10A Option
Cigarette lighter,
10A
Radio
10A Turn signal
Instrument
5A
cluster, Lamp