Takeuchi TCR50 Operator's Manual page 72

OPERATION
Machine Operation
Inspection After Warm-up
After warming up the engine and hydraulic
oil, perform the checks and inspections
described below, and repair if there is a
problem.
1. Check that the warning lamps and meters
are as follows :
• Are all the warning lamps off?
• Is the water temperature gauge showing
within the green range?
2. Check that there are no irregularities in the
exhaust color, sound and vibrations.
3. Set the safety lock lever to the locked
position and check that the control levers
are locked.
Traveling the Machine
� Never allow anyone to enter the
machine working range and machine
path.
� Signal your intention to move by
sounding the horn.
� There are blind spots to the rear of the
machine. Check that the area is safe
and clear.
� Remove any obstacles in the machine's
path.
1. Increase the engine speed.
S2B015
2. Set the safety lock lever to the released
position.
70
WARNING
S2D007