Other Symptoms - Takeuchi TCR50 Operator's Manual

TROUBLESHOOTING

Other Symptoms

For symptoms not included on the table below or if the problem persists after the proper
procedures have been taken, consult a Takeuchi sales or service outlet.
Symptom
Control levers do not
move smoothly
Dumping, swinging or
traveling operation not
possible
Dumping or swinging
force is insufficient
Traveling is not possible
or not smooth
Machine does not travel
straight forward
Travel speed cannot be
changed
Swinging is not possible
or not smooth
Hydraulic oil
temperature is too high
Main cause
� Insufficient grease on left and
right control levers
� Safety lock lever is raised
� Fuse is blown
� Insufficient hydraulic oil level
� Hydraulic oil is not heated
� Air cleaner is clogged
� Hydraulic oil is not of suitable
type
� Stones or foreign objects are
stuck
� Stones or foreign objects are
stuck
� Fuse is blown
� Insufficient grease on swing
bearing
� Insufficient hydraulic oil
142
Procedure
� Add grease.
Refer to page 126.
� Lower the safety lock lever.
Refer to page 54.
� Replace the fuse.
Refer to page 136.
� Replenish to the prescribed
level.
Refer to page 103.
� Perform the warm-up
procedure.
Refer to page 69.
� Clean the air cleaner.
Refer to page 114.
� Replace the hydraulic oil.
Refer to page 122.
� Remove the foreign object.
� Remove the foreign object.
� Replace the fuse.
Refer to page 136.
� Add grease.
Refer to page 115.
� Replenish to the prescribed
level.
Refer to page 103.