Service Data - Takeuchi TCR50 Operator's Manual

MAINTENANCE

Service Data

Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart
below.
� Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
� Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Lubricants and greases
Part
Diesel engine
Engine
oil
oil pan
API-CF-4
Antiwear
hydraulic oil
Hydraulic
(Option:
tank
Biodegradable
oil)
Coolant
Engine
(water +
cooling
coolant) **
system
Travel
Gear oil
reduction
API-GL-4
gear
Slew
Lithium
bearing
based
Dump body,
grease
Track roller
EP-2
NLGI No. 2
Levers
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer's instructions to determine the mixture ratio.
Type by temperature
Type
-22 -4 14 32 50 68 86 104 °F
-30 -20 -10 0 10 20 30 40 °C
SAE 5W-20
50% coolant mixture
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
30% coolant mixture
SAE 90
90
Replacement Capacity
interval L (US. qt.)
Upper limit:
15 (15.9)
After first 50 hrs.
Every 250 hrs.
Lower limit:
9 (9.5)
System: 57
(15.1 US.gal.)
Every 1000 hrs.
Tank: 36
(9.5 US.gal.)
Every 1000 hrs. 15 (15.9)
After first 250
2.6 (2.75)
hrs.*
Every 1000 hrs.
Every 50 hrs.
Daily or every
As required
10 hrs.
When required