Takeuchi TCR50 Operator's Manual page 49

CONTROLS
Instrument Cluster
8. —
9. Fuel Level Warning Lamp
This lamp flashes when the
fuel level is low while the
starter switch is in the ON
position.
L3B016
10. ECM Warning Lamp
This lamp flashes and an
alarm sounds if the ECM
(Electronic Control Module)
detects an engine problem
when the starter switch is in the ON position.
The LCD screen is interrupted with an ECM
error code indicating the problem detected.
Indicators
11. Travel Speed Lamp
This lamp lights when the
travel speed switch is set to
2nd (high speed).
C4B014
12. Glow Lamp
This lamp turns off when
engine
completed.
C4B013
13. Deceleration Lamp
When
button is pressed or the
engine speed is set to low
idle, this lamp lights up to
G4B011
indicate.
preheating is
the deceleration
Meters
14. Water Temperature Gauge
This gauge indicates the
temperature of the engine
coolant water.
The lamps should be within
the green range during machine operation.
The red range indicates overheating.
15. Fuel Gauge
This gauge indicates the
amount of fuel in the tank.
Be sure to top off the tank
before running out of fuel.
Hour Meter
This meter displays the total engine running
time in hours.
The rightmost digit indicates tenths of hours
(6 minutes).
Set the inspection and maintenance intervals
according to the time displayed on the hour
meter.
47