Planar Ultrares In Standby Mode - Planar ultrares User Manual

Planar UltraRes in Standby Mode

If you are unsure about whether or not the display is on but in standby mode, look for
the small Standby LED. If it is off, you will not see the LED. If it is on but in Standby
mode, you will see a blue LED. As the display starts, the LED blinks until the display is
seen. Once it is there, the LED turns off.
Planar UltraRes User Manual
Powering On/Off Planar UltraRes Displays
Insert IR sensor cord into the IR
input located on the I/O panel
this side.
17