Planar ultrares User Manual page 32

Hide thumbs Also See for ultrares:
Table of Contents

Advertisement

If you have screwed the template in place, remove each screw and the
7
template.
Line up the middle hole of the top wall mount with the screw hole drilled
8
from the template.
Note:
This picture shows mounts for a landscape installation.
Tighten the screw into the mount.
9
Use a level to make sure the mount is level.
10
Then install additional screws as needed.
11
Note:
Screws installed near the mount hooks provide the best support.
Install the center screw in the bottom mount and repeat steps
12
additional screws that you want to install. Note that there are open mount
channels on the brackets. So you can install the screws wherever necessary
along those channels.
Planar UltraRes User Manual
Installing an UltraRes Display on a Wall
-
for any
10
11
32

Advertisement

Table of Contents
loading

Table of Contents