Table of Contents
Advertisement
In the hole marked "Top" on the template, mark the center of the hole on the
4
wall. Be sure the vertical line runs through the center of the hole and that the
template is plumb. You may wish to screw the template in place to make the
next steps easier.
Note:
If you are installing a landscape display and the template is too long, you can break the
template at the notch labeled "P. "
Let the template hang vertically so it is plumb, as the bottom hole in the
5
template determines where the bottom mount will be installed.
Mark the center of the hole at the bottom of the template that corresponds
6
with your display orientation.
Planar UltraRes User Manual
Installing an UltraRes Display on a Wall
31
Advertisement
Table of Contents
