Table of Contents
Advertisement
Powering On/Off Planar UltraRes Displays
Planar UltraRes in Standby Mode
If you are unsure about whether or not the display is on but in standby mode, look for
the small Standby LED. If it is off, you will not see the LED. If it is on but in Standby
mode, you will see a red LED. As the display starts, the LED blinks until it is on. Once it
is on, the LED turns off.
10
Planar UltraRes User Manual
Insert IR sensor cord
into the IR input on the
bottom of the display.
Advertisement
Table of Contents
