Touchscreen Setup
USB and Power Hook-Up
Note:
Note:
Touchscreen MultiTouch Driver Installation
Plug in the 5V, 4A Power supply connector to the touchscreen power
1
connector.
USB and Power connection to the touchscreen.
Connect the 5V line cord to the power adapter.
2
Plug one end of the USB cable to the USB connector on the touchscreen and
3
the other end to the PC.
USB and Power connection to the touchscreen.
With the PC on, plug in the USB memory stick to the USB drive.
1
Locate and open the USB drive.
2
Planar UltraRes User Manual
Power
USB
USB and Power Hook-Up
114