Teledyne ML - T100 UV Fluorescence SO2 Analyzer
9.4. PNEUMATIC OPERATION
IMPORTANT
IMPORTANT
9.4.1. SAMPLE GAS FLOW
EXHAUST
gas outlet
SAMPLE
gas inlet
Figure 9-10:
It is important that the sample airflow system is leak-tight and not pressurized over
ambient pressure. Regular leak checks should be performed on the analyzer as described
in the maintenance schedule, Table 8-1. Procedures for correctly performing leak checks
can be found in Section 8.3.6.
Relative Pressure versus Absolute Pressure
In this manual vacuum readings are given in inches of mercury absolute pressure (in-Hg-A), i.e.
indicate an absolute pressure referenced against zero (a perfect vacuum).
The Flow of gas through the T100 UV Fluorescence SO
internal pump that pulls air though the instrument.
KICKER EXHAUST
TO PUMP
PUMP
SAMPLE FILTER
CRITICAL
FLOW
ORIFICE
Gas Flow and Location of Critical Flow Orifice
06807A(DCNxxxx)
HYDROCARBON
SCRUBBER
(KICKER)
EXHAUST TO OUTER
LAYER OF KICKER
FLOW
FLOW
SENSOR
CONTROL
ASSY
FLOW / PRESSURE
Theory Of Operation
Analyzer is created by a small
2
Chassis
SAMPLE
CHAMBER
UV
LAMP
PMT
SAMPLE
PRESSURE
SENSOR
SENSOR PCA
235