Panel Indicator Lights; Trouble Beeps - Interlogix Simon XT User Manual

Table 9: Siren sounds
Function
Interior and panel
siren*
Interior and panel
siren*
Interior and panel siren Temporal 3
Exterior siren
* This feature is not verified for use by UL.
Note: Temporal 3 refers to a continuous pattern of three siren pulses, then off for 1.5 seconds,
three siren pulses, then off for 1.5 seconds.

Panel indicator lights

Use Table 10
below
Table 10: Indicator light
Button
Doors+Windows
Motions
Disarm
Status
OK
Chime (solid bell)
Special chime (outlined bell)
Light schedules (clock)
Sensor lights (light bulb)
Latchkey on (key)

Trouble beeps

Your security system is able to automatically test itself for:
•
Power failures
•
Low batteries
•
Nonworking sensors
20
Fire
Temporal 3
Temporal 3
Temporal 3
to understand the panel indicator lights.
When button light is on
Doors and windows armed
Motions armed
System disarmed
System trouble, open sensor,
or bypassed sensor
There are no open sensors
Door will cause chime
Motion will cause chime
Time-activated lights feature
enabled
Sensor-activated lights feature
enabled
Latchkey feature enabled
Intrusion
Steady
Steady
Steady
Steady
When button flashes
Doors and window armed and
no entry delay on
Motion sensors armed and
latchkey on
System subdisarmed
System in alarm
Emergency
Fast on/off
Fast on/off
Fast on/off
Simon XT User Manual