Interlogix Simon XT User Manual page 24

If your installer programmed your system for remote touchpad arming, you must
enter your home to start the entry delay before you can use your keyfob to
disarm the system.
Note: Panic alarms need to be silenced from the panel, a remote handheld
touchpad, or another keyfob. They cannot be silenced from the same keyfob that
activated the alarm.
Table 7: Key fob button operation
Task
Arm doors and windows.
Arm doors, windows, and motion sensors.
Arm doors, windows, and motion sensors, and
to activate the latchkey option.
Send a panic (intrusion, silent, or nonmedical
emergency) alarm to the central monitoring
station.
Can be programmed to control a device
connected to a universal module.
Can be programmed to control a device
connected to a lamp module. Press once to turn
on all lights on lamp module. Press again to
turn off all lights on lamp module turn off.
Disarm your security system
18
Instructions
Press the Lock button once.
Press the Lock button twice.
Press the Lock button three times.
Press the Lock and Unlock buttons
simultaneously for 3 seconds.
(Check with your installer to find out how the
key fob panic buttons will operate.)
Press the Star button once.
Press the Light button once.
Press the Unlock button once.
Simon XT User Manual