Table of Contents
Advertisement
Installing the DC Power Supply
Step 5
Use a ratcheting torque screwdriver to torque the terminal block plug captive screw (above the installed wire lead) from
4.425 in.-lb (.5 N-m) to 5.310 in-lb (.6 N-m) as shown in the figure below.
Figure 34: Torquing the DC Power Supply Terminal Block Plug Screws
1
Cisco ASR 907 Router Hardware Installation Guide
80
Installing the Cisco ASR 907 Router
Torque is from 4.425 in.-lb (.5 N-m) to 5.310 in-lb (.6
N-m).
Advertisement
Table of Contents
