Table of Contents
Advertisement
Unpacking and Verifying the Shipped Contents
Warning
Unpacking and Verifying the Shipped Contents
Step 1
Inspect the box for any shipping damage. If there is obvious physical damage, contact your Cisco service representative.
Step 2
Unpack the Cisco ASR 907 Router.
Step 3
Perform a visual inspection of the chassis.
Step 4
Use the table below to check the contents of the Cisco ASR 907 Router shipping container. Do not discard the shipping
container. You will need the container if you move or ship the Cisco ASR 907 Router in the future.
able 6: Cisco ASR 907 Router Shipping Container Contents
Component
Chassis
Cisco ASR 907 Router Hardware Installation Guide
38
• Console terminal (an ASCII terminal or a PC running terminal emulation software) that is configured
for 9600 baud, 8 data bits, no parity, and 2 stop bits
• Console cable for connecting to the console port
• (Optional) Modem for connecting to the auxiliary port for remote administrative access
• Auxiliary cable for connecting to the auxiliary port (you can supply this cable or order one)
• Ratcheting torque screwdriver with a Phillips head that exerts up to 30 pound-force per square inch
(in-lb) of pressure
• Crimping tool as specified by the ground lug manufacturer
• 8 AWG copper wire for the power cord
• Wire-stripping tools for stripping both 6 AWG and 8 AWG wire
• Tape measure and level
Only trained and qualified personnel should be allowed to install or replace this equipment. Statement 49
When you receive your chassis, perform the following steps and use the Shipping Contents Checklist.
Description
Cisco ASR 907 Router chassis
Fan tray
Power supplies
RSP
Interface modules
Preparing for Installation
Advertisement
Table of Contents
