Table of Contents
Advertisement
Installation Checklist
• Use the show environment all command regularly to check the internal system status. The environmental
• Keep the Cisco ASR 907 Router off the floor and out of areas that collect dust.
• Follow ESD-prevention procedures to avoid damage to equipment. Damage from static discharge can
Locating for Proper Airflow
Ensure that the Cisco ASR 907 Router location has enough airflow to keep the system operating within the
environmental characteristics and the air temperature is sufficient to compensate for the heat dissipated by
the system. For more information, see
Installation Checklist
To assist you with your installation and to provide a record of what was done by whom and when, photocopy
the Cisco ASR 907 Router Installation Checklist shown in the tabl below. Use this to record the completion
and verification of each procedure. After the checklist is completed, place it in your Site Log along with the
other records pertaining to your new Cisco router.
Table 5: Cisco ASR 907 Router Installation Checklist
Task
Date on which chassis received
Chassis and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines
reviewed
Installation Checklist copied
Site Log established and background
information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device
names, and so on, available
Required tools available
Cisco ASR 907 Router Hardware Installation Guide
34
monitor continually checks the interior chassis environment; it provides warnings about high temperature
and creates reports on other potentially dangerous occurrences. If warning messages are displayed, take
immediate action to identify the cause, and correct the problem.
cause immediate or intermittent equipment failure.
Verified By
Air Flow
Guidelines.
Date
Preparing for Installation
Advertisement
Table of Contents
