Removing And Replacing The Dust Filter - Cisco ASR 907 Hardware Installation Manual

Installing the Cisco ASR 907 Router

Removing and Replacing the Dust Filter

The chassis is shipped with a blank fan filter cover. To install the dust filter:
Step 1
Remove the blank fan filter cover (A907-FAN-F=) by unscrewing the captive installation screws at the top and bottom
of the dust filter frame. See the figure below.
Figure 25: Blank Fan Filter
1 LEDs
Removing and Replacing the Dust Filter
2
Cisco ASR 907 Router Hardware Installation Guide
Dummy fan filter
63