Toshiba e-STUDIO206L Service Manual page 1519

Page
3-70 e-STUDIO506 has been added.
3-71 e-STUDIO506 has been added.
3-72 e-STUDIO506 has been added.
3-74 e-STUDIO506 has been added.
3-76 "Main switch" has been changed to "Main power switch".
3-77 "Main switch" has been changed to "Main power switch".
3-78 "Main switch" has been changed to "Main power switch".
"Main switch" has been changed to "Main power switch".
3-81 The description of the parts for the SLG has been changed.
e-STUDIO506 has been added.
4-6 e-STUDIO506 has been added.
4-16 "[A] Xenon lamp" has been added.
4-18 "[B] LED" and the disassembly and replacement procedures have been added.
4-19 "[A] 4-line CCD" has been added.
4-21 The contents of Note 2 have been changed.
4-22 "[B] 3-line CCD" and the disassembly and replacement procedures have been added.
The contents of step (7) in the disassembly and replacement procedures for the carriage-1
4-26
have been changed.
The disassembly and replacement procedures in "4.3.10 LED driving PC board (LEDB)"
4-31
have been added.
4-39 e-STUDIO506 has been added.
4-50 e-STUDIO506 has been added.
4-58 e-STUDIO506 has been added.
4-62 e-STUDIO506 has been added.
4-64 e-STUDIO506 has been added.
"(Refer to Service Handbook Chap. 3)" has been deleted from the Notes.
4-76
e-STUDIO506 has been added.
4-87 The contents of Note 2 have been changed.
4-90 The note has been added. The Fig.4-256 have been changed.
4-95 e-STUDIO506 has been added.
4-99 e-STUDIO506 has been added.
4-100 e-STUDIO506 has been added.
4-101 e-STUDIO506 has been added.
4-102 e-STUDIO506 has been added.
4-103 e-STUDIO506 has been added.
4-134 e-STUDIO506 has been added.
In [A], "Refer to "Appendix" for the codes in Test mode (03), Test print mode (04),
5-1
Adjustment mode (05), and Setting mode (08)." has been added.
5-40 "Main switch" has been changed to "Main power switch".
5-53 In the Remarks, the default values for the e-STUDIO506 have been added.
5-54 In the Remarks, the default values for the e-STUDIO506 have been added.
5-55 In the Remarks, the default values for the e-STUDIO506 have been added.
5-56 In the Remarks, the default values for the e-STUDIO506 have been added.
6-48 e-STUDIO506 has been added.
6-55 The contents of "[A] Replacing the lens unit" have been changed.
7-5 The preventive maintenance timing for the e-STUDIO506 has been added.
In Fig. 7-2, the operational flow has been changed.
7-6 "* When the authentication screen appears, press [OK]. (Enter the password, if one has
been set.)" has been added.
The cleaning and lubricating timing for the e-STUDIO506 has been added to the Notes.
7-17
e-STUDIO506 has been added.
7-20 The replacement cycle for the e-STUDIO506 has been added.
e-STUDIO206L/256/306/356/456/506
REVISION RECORD
Ver. 02 <2012.04.20>
Contents
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved